Seriously PRO SP Racing F3 Mini Flight Controller (Offical CLEANFLIGHT board) SP-PRO-Mini
THE SPRACINGF3MINI DESIGN IS:
Innovative - New, smart and practical design features.
Flexible - Corners are removable for micro frames, buttons and transponder can be detached and relocated.
Durable - Though-hole connectors for all main I/O for crash-proof installation.
Stackable - Mount to your PDB or OSD.
Compact - Center of PCB measures 36x24mm, main area 36x36mm, transponder section is 36x6mm, entire board just 36x43mm.
Professional - Symmetrical, Neat and Tidy.
Note that returns on these are not accepted after soldering. Please plug the board into your computer BEFORE you solder it to check it works.
The SPRacingF3Mini has some awesome world-first flight-controller features that makes it the board of choice for any new multi-rotor or fixed-wing build!
Jaw-Dropping Flight Performance
The SPRacingF3Mini uses advanced processor, sensor and software technologies to make your aircraft fly like it's on rails.
The SPRacingF3Mini flight-controller and the Cleanflight software enables the precision flying you need for fast FPV racing.
Race Timing Transponder
The SPRacingF3Mini is the first and only mini board that features a race transponder system for recording your lap times. Each board comes with a special transponder code to identify you at race events. Compatible with i-LAP receiver systems. Two LEDs for clockwise and anti-clockwise race tracks.
Built-in 5v regulator (BEC)
The built-in 5V regulator makes wiring-up simpler and cheaper. Fixed-wing aircraft also become so easy: connect receiver, battery, 2 servos and an ESC and you're done!
The SPRacingF3Mini has an ARM Cortex-M4 72Mhz CPU with Math co-processor (FPU) for efficient flight calculations that gets more done in less time.
Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
The SPRacingF3Mini is the first and only mini board that features a MicroSD card socket for logging. Supports MicroSD/SDHC up to 32GB!
The only full-featured mini-size board with USB socket which is not shared with serial ports. No more hassle configuring or flashing.
The SPRacingF3Mini runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
Tiny and extremely lightweight
The SPRacingF3Mini has a standard 36x36mm form-factor with 30.5mm mounting holes with detachable tabs for flexible mounting.
The mini center section of the board measures 36x24mm.
The only mini board to feature two built-in buttons. Uses currently include receiver binding, configuration reset and bootloader entry, more uses planned!
Broad RC receiver Support
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM. No external inverters required (built-in), receiver powered via flight battery or USB for easy configuration.
Each SPRacingF3Mini comes with a unique QR-CODE so you can download your personal transponder code.
Output for multi-colored LED strips - great for FPV racing, line-of-sight flying orientation and night flying.
Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
Full support for OneShot ESCs for easy PID tuning and a sharper response.
Built in battery voltage monitoring, input for additional current monitoring.
Sonar support for precision low-altitude hold.
I2C port always powered, perfect for external sensors or always-on OLED Screen.
Buzzer port for audible warnings and notifications.
The SPRacingF3Mini features a copper-etched Cleanflight logo so you can show your support!
GPS Ready *
With a full-set of sensors (Accelerometer, Gryoscope, Compass and Barometer) each SPRacingF3Mini is capable of GPS Navigation
* Available in Cleanflight soon, New GPS features under active development.