Seriously PRO EVO Flight Controller (Offical CLEANFLIGHT board) SP-PRO-EVO
THE SPRACINGF3EVO DESIGN IS
Practical - Facilitates multiple installation scenarios: choose to use connectors, pin-headers or direct-solder wires.
Durable - Though-hole connectors for all main I/O for crash-proof installation.
Stack able - Mount to compatible PDBs or OSDs using just 2 through-hole pins from each corner.
Compact - Entire board measures just 36x36mm.
Professional - Symmetrical, Neat and Tidy.
The SPRacingF3EVO has flight-controller features that makes it the board of choice for any new multi-rotor build.
Jaw-Dropping Flight Performance
The SPRacingF3EVO uses advanced processor, sensor and software technologies to make your aircraft fly like it's on rails.
The SPRacingF3EVO flight-controller and the Cleanflight software enables the precision flying you need for fast FPV racing.
The SPRacingF3EVO has an ARM Cortex-M4 72Mhz CPU with Math co-processor (FPU) for efficient flight calculations that gets more done in less time.
Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
SPI sensor connection
The gyroscope and accelerometer sensors are connected to the fast SPI bus. This enables the software to get more data even quicker to help stabilize your aircraft even better
Race Timing Transponder
The SPRacingF3EVO features a race transponder system for recording your lap times. Each board comes with a special transponder code to identify you at race events. Compatible with i-LAP receiver systems.
The SPRacingF3EVO is the first and only standard sized board for Cleanflight that features a MicroSD card socket for logging. Supports MicroSD/SDHC up to 32GB - just leave one in and log every flight!
USB socket to configuration of flight controller and for pass-though configuration of BlHeli ESCs.
USB socket is not shared with any of the 3 serial ports. No more unplugging your OSD when configuring
The SPRacingF3EVO runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
Small and lightweight
The SPRacingF3EVO has a standard 36x36mm form-factor with 30.5mm mounting holes on a thick PCB for durability.
The SPRacingF3EVO is a stackable design. Connect an OSD or PDB directly under the board for a super-tidy and wire-free installation.
Stackable designs are proven to be more durable in a crash.
Broad RC receiver support
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM. No external inverters required (built-in), receiver powered via flight battery or USB for easy configuration.
Dedicated ports for PPM/SBus/SumH/etc for easy connections. Socket for plug and play Spektrum Satellite receiver.
Each SPRacingF3EVO comes with a unique QR-CODE so you can download your personal transponder code.
Output for multi-colored LED strips - great for FPV racing, line-of-sight flying orientation and night flying.
Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
Full support for OneShot ESCs for easy PID tuning and a sharper response.
Built in battery voltage monitoring, input for additional current monitoring.
Sonar support for precision low-altitude hold.
I2C port always powered, perfect for external sensors or always-on OLED Screen.
Buzzer port for audible warnings and notifications.
Cleanflight logos and stickers
The SPRacingF3EVO features a copper-etched Cleanflight logo so you can show your support!
GPS Ready *
With a full-set of sensors (Accelerometer, Gryoscope, Compass and Barometer) each SPRacingF3EVO is capable of GPS Navigation
* Available in Cleanflight soon, New GPS features under active development.